RIDGID R3000 Manuale dell'Operatore Scaricare il pdf (Pagina 12)

Fig. 7

OPERATION

METAL CUTTING

See Figure 7.

Metals such as sheet steel, pipe, steel rods, aluminum,

brass, and copper may be cut with your saw. Be careful not

to twist or bend the saw blade. Do not force. We recommend

cutting oil when cutting most soft metals and steel. Cutting oil

will also keep blades cool, increase cutting action, and

prolong blade life.

Never use gasoline since normal sparking of motor could

ignite fumes. Clamp the work firmly and cut close to the

clamping point to eliminate any vibration of the work being

cut. When cutting conduit pipe or angle iron, clamp work in

a vise if possible and cut close to the vise. To cut thin sheet

material, "sandwich" the material between hardboard or

plywood and clamp the layers to eliminate vibration and

material tearing.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Nessun commento

RIDGID R3000 Manuale dell'Operatore Pagina 12